Тестирование приложений django

See also

testing tutorial и advanced testing topics.

Этот документ разбит на два основных раздела. Во-первых, мы объясним как писать тесты для Django. Во-вторых, мы объясним, как их запускать.

Написание тестов

Юнит-тестирование Django использует стандартный модуль unittest. Этот модуль определяет тесты, основанные на классах.

unittest2

Python 2.7 вносит некоторые большие изменения в библиотеку unittest, добавляя некоторые крайне важные возможности. Чтобы быть уверенным, что все проекты Django могут ими воспользоваться, Django поставляется вместе с копией unittest2, которая является копией unittest из Python 2.7’, портированной в Python 2.6.

Для того, чтобы получить доступ к этой библиотеке, Django предоставляет псевдоним для модуля под именем django.utils.unittest. Если Вы используете Python 2.7, или у Вас установлен unittest2, Django соотнесёт псевдоним с соответствующей библиотекой. В противном случае, Django будет использовать свою собственную версию unittest2.

Чтобы воспользоваться этим псевдонимом, просто напишите:

from django.utils import unittest

там же, где Вы написали бы:

import unittest

Если Вы хотите продолжать использовать старую библиотеку unittest, Вы можете это сделать, но вот только не сможете воспользоваться новыми возможностями unittest2.

Вот пример, в котором создаются подклассы django.test.TestCase, который является подклассом unittest.TestCase, который запускает каждый тест изолированно:

from django.test import TestCase
from myapp.models import Animal

class AnimalTestCase(TestCase):
    def setUp(self):
        Animal.objects.create(name="lion", sound="roar")
        Animal.objects.create(name="cat", sound="meow")

    def test_animals_can_speak(self):
        """Животные, которые могут "говорить" определены корректно"""
        lion = Animal.objects.get(name="lion")
        cat = Animal.objects.get(name="cat")
        self.assertEqual(lion.speak(), 'The lion says "roar"')
        self.assertEqual(cat.speak(), 'The cat says "meow"')

Когда вы запускаете ваши тесты, по умолчанию ищутся все тестовые случаи (то есть, подклассы unittest.TestCase) во всех файлах, чьё имя начинается с test, автоматически создаёт из них набор тестов и запускает этот набор.

Changed in version 1.6: Раньше исполнитель тестов по умолчанию в Django всего лишь искал тесты в файлах tests.py и models.py в пакетах Python, перечисленных в :setting:`INSTALLED_APPS`.

Более подробно об unittest, смотрите документацию Python.

Warning

Если ваши тесты полагаются на доступ к базе данных, такой как создание или запросы к моделям, убедитесь, что вы создаёте свои тесты как подклассы django.test.TestCase, а не unittest.TestCase.

Использование unittest.TestCase позволяет избежать накладных расходов на запуск каждого теста с транзакциями и отменами изменений в БД, но если ваш тест взаимодействует с БД, то результат тестов будет зависеть от порядка их выполнения. Это может привести к тому, что отдельно запущенный тест будет проходить, а при запуске его в наборе тестов будет выдавать ошибку.

Выполнение тестов

После того, как вы написали свои тесты, их можно запустить при помощи команды :djadmin:`test` утилиты manage.py вашего проекта:

$ ./manage.py test

Обнаружение тестов основывается на встроенное обнаружение тестов unittest`а. По умолчанию будут найдены тесты во всех файлах с названием “test*.py” в текущем рабочем каталоге.

Вы можете указать конкретные тесты для запуска, передав “метки тестов” в ./manage.py test. Каждая метка может быть полным путём Python к пакету, модулю, подклассом TestCase или тестовым методом. Например:

# Запустить все тесты в модуле animals.tests
$ ./manage.py test animals.tests

# Запустить все тесты из пакета 'animals'
$ ./manage.py test animals

# Запустить только один тестовый случай
$ ./manage.py test animals.tests.AnimalTestCase

# Запустить только один тестовый метод
$ ./manage.py test animals.tests.AnimalTestCase.test_animals_can_speak

Кроме того, вы можете указать путь к каталогу для поиска тестов там:

$ ./manage.py test animals/

Вы можете определить собственный шаблон, которому должны соответствовать файлы с тестами при помощи аргумента командной строки -p (или --pattern), если ваши тестовые файлы не подпадают под шаблон test*.py:

$ ./manage.py test --pattern="tests_*.py"

Changed in version 1.6: Ранее метки тестов выглядели как applabel, applabel.TestCase, или applabel.TestCase.test_method, но не были настоящими путями Python, и тесты обнаруживались только в файлах tests.py или models.py в пакетах Python, перечисленных в :setting:`INSTALLED_APPS`. Опция``–pattern`` и шаблоны файлов, как и тестовые метки, появились начиная с версии 1.6.

Если вы нажимаете Ctrl-C в процессе выполнения тестов, выполнитель теста дождётся завершения текущего теста и затем завершится. В процессе завершения выполнитель тестов выведет детали всех ошибок в тестах, сообщит сколько тестов было выполнено и количество ошибок и неудачных тестов, после чего уничтожит все тестовые базы данных, как обычно. Такое нажатие на Ctrl-C может быть полезным, если вы забыли использовать опцию :djadminopt:`–failfast`, обнаружили, что некоторые тесты неожиданно не проходят и хотите получить подробности об ошибках не ожидая завершения всех тестов.

Если вы не хотите ждать завершения текущего теста, вы можете нажать Ctrl-C второй раз и тест будет завершён немедленно. Никаких деталей о тестах, пройденных до этого не будет выведено и все базы данных, созданные для тестов, не будут разрушены.

Возможны тесты с предупреждениями

Хорошей идеей является запуск тестов с разрешением предупреждений Python: python -Wall manage.py test. Флаг -Wall говорит Python`у что необходимо отображать предупреждения о нерекомендованных возможностях. Django, как и многие другие библиотеки Python, использует эти предупреждения чтобы сообщить о возможностях, которые в будущем будут ликвидированы. Он так же может отмечать места в вашем коде, которые не то чтобы не корректные, но их можно реализовать лучше.

Тестовые базы данных

Тесты, которым требуются базы данных (то есть, тесты моделей) не будут использовать вашу “реальную” базу данных. Для тестов будут созданы пустые базы данных.

Вне зависимости от успешности выполнения теста, после выполнения всех тестов базы данных будут уничтожены.

По умолчанию тестовые базы данных получают свои названия путём добавления test_ к началу значения настройки :setting:`NAME` для баз данных, определённых в :setting:`DATABASES`. Если вы используете движок базы данных SQLite, то тесты будут по умолчанию использовать базу данных in-memory (то есть, база данных будет создана в памяти, миную файловую систему!). Если вы хотите использовать другое имя базы данных, определите :setting:`TEST_NAME` в словаре для всех заданных баз данных в :setting:`DATABASES`.

Наряду с использованием отдельных баз дынных, выполнитель теста будет использовать ещё и все те же настройки баз данных, которые вы указали в своё файле настроек: :setting:`ENGINE <DATABASE-ENGINE>`, :setting:`USER`, :setting:`HOST`, и так далее. Тестовая база данных создаётся пользователем, указанным в :setting:`USER`, так что вы должны быть уверены need to make sure that the given user account has sufficient privileges to create a new database on the system.

For fine-grained control over the character encoding of your test database, use the :setting:`TEST_CHARSET` option. If you’re using MySQL, you can also use the :setting:`TEST_COLLATION` option to control the particular collation used by the test database. See the settings documentation for details of these advanced settings.

Finding data from your production database when running tests?

If your code attempts to access the database when its modules are compiled, this will occur before the test database is set up, with potentially unexpected results. For example, if you have a database query in module-level code and a real database exists, production data could pollute your tests. It is a bad idea to have such import-time database queries in your code anyway - rewrite your code so that it doesn’t do this.

See also

The advanced multi-db testing topics.

Order in which tests are executed

In order to guarantee that all TestCase code starts with a clean database, the Django test runner reorders tests in the following way:

• All TestCase subclasses are run first.
• Then, all other unittests (including unittest.TestCase, SimpleTestCase and TransactionTestCase) are run with no particular ordering guaranteed nor enforced among them.
• Then any other tests (e.g. doctests) that may alter the database without restoring it to its original state are run.

Changed in version 1.5: Before Django 1.5, the only guarantee was that TestCase tests were always ran first, before any other tests.

Note

The new ordering of tests may reveal unexpected dependencies on test case ordering. This is the case with doctests that relied on state left in the database by a given TransactionTestCase test, they must be updated to be able to run independently.

Other test conditions

Regardless of the value of the :setting:`DEBUG` setting in your configuration file, all Django tests run with :setting:`DEBUG`=False. This is to ensure that the observed output of your code matches what will be seen in a production setting.

Caches are not cleared after each test, and running “manage.py test fooapp” can insert data from the tests into the cache of a live system if you run your tests in production because, unlike databases, a separate “test cache” is not used. This behavior may change in the future.

Understanding the test output

When you run your tests, you’ll see a number of messages as the test runner prepares itself. You can control the level of detail of these messages with the verbosity option on the command line:

Creating test database...
Creating table myapp_animal
Creating table myapp_mineral
Loading 'initial_data' fixtures...
No fixtures found.

This tells you that the test runner is creating a test database, as described in the previous section.

Once the test database has been created, Django will run your tests. If everything goes well, you’ll see something like this:

----------------------------------------------------------------------
Ran 22 tests in 0.221s

OK

If there are test failures, however, you’ll see full details about which tests failed:

======================================================================
FAIL: test_was_published_recently_with_future_poll (polls.tests.PollMethodTests)
----------------------------------------------------------------------
Traceback (most recent call last):
  File "/dev/mysite/polls/tests.py", line 16, in test_was_published_recently_with_future_poll
    self.assertEqual(future_poll.was_published_recently(), False)
AssertionError: True != False

----------------------------------------------------------------------
Ran 1 test in 0.003s

FAILED (failures=1)

A full explanation of this error output is beyond the scope of this document, but it’s pretty intuitive. You can consult the documentation of Python’s unittest library for details.

Note that the return code for the test-runner script is 1 for any number of failed and erroneous tests. If all the tests pass, the return code is 0. This feature is useful if you’re using the test-runner script in a shell script and need to test for success or failure at that level.

Speeding up the tests

In recent versions of Django, the default password hasher is rather slow by design. If during your tests you are authenticating many users, you may want to use a custom settings file and set the :setting:`PASSWORD_HASHERS` setting to a faster hashing algorithm:

PASSWORD_HASHERS = (
    'django.contrib.auth.hashers.MD5PasswordHasher',
)

Don’t forget to also include in :setting:`PASSWORD_HASHERS` any hashing algorithm used in fixtures, if any.

Testing tools

Django provides a small set of tools that come in handy when writing tests.

The test client

The test client is a Python class that acts as a dummy Web browser, allowing you to test your views and interact with your Django-powered application programmatically.

Some of the things you can do with the test client are:

• Simulate GET and POST requests on a URL and observe the response – everything from low-level HTTP (result headers and status codes) to page content.
• See the chain of redirects (if any) and check the URL and status code at each step.
• Test that a given request is rendered by a given Django template, with a template context that contains certain values.

Note that the test client is not intended to be a replacement for Selenium or other “in-browser” frameworks. Django’s test client has a different focus. In short:

• Use Django’s test client to establish that the correct template is being rendered and that the template is passed the correct context data.
• Use in-browser frameworks like Selenium to test rendered HTML and the behavior of Web pages, namely JavaScript functionality. Django also provides special support for those frameworks; see the section on LiveServerTestCase for more details.

A comprehensive test suite should use a combination of both test types.

Overview and a quick example

To use the test client, instantiate django.test.client.Client and retrieve Web pages:

>>> from django.test.client import Client
>>> c = Client()
>>> response = c.post('/login/', {'username': 'john', 'password': 'smith'})
>>> response.status_code
200
>>> response = c.get('/customer/details/')
>>> response.content
'<!DOCTYPE html...'

As this example suggests, you can instantiate Client from within a session of the Python interactive interpreter.

Note a few important things about how the test client works:

• The test client does not require the Web server to be running. In fact, it will run just fine with no Web server running at all! That’s because it avoids the overhead of HTTP and deals directly with the Django framework. This helps make the unit tests run quickly.

• When retrieving pages, remember to specify the path of the URL, not the whole domain. For example, this is correct:

  >>> c.get('/login/')
  

  This is incorrect:

  >>> c.get('http://www.example.com/login/')
  

  The test client is not capable of retrieving Web pages that are not powered by your Django project. If you need to retrieve other Web pages, use a Python standard library module such as urllib or urllib2.

• To resolve URLs, the test client uses whatever URLconf is pointed-to by your :setting:`ROOT_URLCONF` setting.

• Although the above example would work in the Python interactive interpreter, some of the test client’s functionality, notably the template-related functionality, is only available while tests are running.

  The reason for this is that Django’s test runner performs a bit of black magic in order to determine which template was loaded by a given view. This black magic (essentially a patching of Django’s template system in memory) only happens during test running.

• By default, the test client will disable any CSRF checks performed by your site.

  If, for some reason, you want the test client to perform CSRF checks, you can create an instance of the test client that enforces CSRF checks. To do this, pass in the enforce_csrf_checks argument when you construct your client:

  >>> from django.test import Client
  >>> csrf_client = Client(enforce_csrf_checks=True)
  

Making requests

Use the django.test.client.Client class to make requests.

class django.test.client.Client(enforce_csrf_checks=False, **defaults)

It requires no arguments at time of construction. However, you can use keywords arguments to specify some default headers. For example, this will send a User-Agent HTTP header in each request:

>>> c = Client(HTTP_USER_AGENT='Mozilla/5.0')

The values from the extra keywords arguments passed to get(), post(), etc. have precedence over the defaults passed to the class constructor.

The enforce_csrf_checks argument can be used to test CSRF protection (see above).

Once you have a Client instance, you can call any of the following methods:

get(path, data={}, follow=False, **extra)

Makes a GET request on the provided path and returns a Response object, which is documented below.

The key-value pairs in the data dictionary are used to create a GET data payload. For example:

>>> c = Client()
>>> c.get('/customers/details/', {'name': 'fred', 'age': 7})

...will result in the evaluation of a GET request equivalent to:

/customers/details/?name=fred&age=7

The extra keyword arguments parameter can be used to specify headers to be sent in the request. For example:

>>> c = Client()
>>> c.get('/customers/details/', {'name': 'fred', 'age': 7},
...       HTTP_X_REQUESTED_WITH='XMLHttpRequest')

...will send the HTTP header HTTP_X_REQUESTED_WITH to the details view, which is a good way to test code paths that use the django.http.HttpRequest.is_ajax() method.

CGI specification

The headers sent via **extra should follow CGI specification. For example, emulating a different “Host” header as sent in the HTTP request from the browser to the server should be passed as HTTP_HOST.

If you already have the GET arguments in URL-encoded form, you can use that encoding instead of using the data argument. For example, the previous GET request could also be posed as:

>>> c = Client()
>>> c.get('/customers/details/?name=fred&age=7')

If you provide a URL with both an encoded GET data and a data argument, the data argument will take precedence.

If you set follow to True the client will follow any redirects and a redirect_chain attribute will be set in the response object containing tuples of the intermediate urls and status codes.

If you had a URL /redirect_me/ that redirected to /next/, that redirected to /final/, this is what you’d see:

>>> response = c.get('/redirect_me/', follow=True)
>>> response.redirect_chain
[(u'http://testserver/next/', 302), (u'http://testserver/final/', 302)]

post(path, data={}, content_type=MULTIPART_CONTENT, follow=False, **extra)

Makes a POST request on the provided path and returns a Response object, which is documented below.

The key-value pairs in the data dictionary are used to submit POST data. For example:

>>> c = Client()
>>> c.post('/login/', {'name': 'fred', 'passwd': 'secret'})

...will result in the evaluation of a POST request to this URL:

/login/

...with this POST data:

name=fred&passwd=secret

If you provide content_type (e.g. text/xml for an XML payload), the contents of data will be sent as-is in the POST request, using content_type in the HTTP Content-Type header.

If you don’t provide a value for content_type, the values in data will be transmitted with a content type of multipart/form-data. In this case, the key-value pairs in data will be encoded as a multipart message and used to create the POST data payload.

To submit multiple values for a given key – for example, to specify the selections for a <select multiple> – provide the values as a list or tuple for the required key. For example, this value of data would submit three selected values for the field named choices:

{'choices': ('a', 'b', 'd')}

Submitting files is a special case. To POST a file, you need only provide the file field name as a key, and a file handle to the file you wish to upload as a value. For example:

>>> c = Client()
>>> with open('wishlist.doc') as fp:
...     c.post('/customers/wishes/', {'name': 'fred', 'attachment': fp})

(The name attachment here is not relevant; use whatever name your file-processing code expects.)

Note that if you wish to use the same file handle for multiple post() calls then you will need to manually reset the file pointer between posts. The easiest way to do this is to manually close the file after it has been provided to post(), as demonstrated above.

You should also ensure that the file is opened in a way that allows the data to be read. If your file contains binary data such as an image, this means you will need to open the file in rb (read binary) mode.

The extra argument acts the same as for Client.get().

If the URL you request with a POST contains encoded parameters, these parameters will be made available in the request.GET data. For example, if you were to make the request:

>>> c.post('/login/?visitor=true', {'name': 'fred', 'passwd': 'secret'})

... the view handling this request could interrogate request.POST to retrieve the username and password, and could interrogate request.GET to determine if the user was a visitor.

If you set follow to True the client will follow any redirects and a redirect_chain attribute will be set in the response object containing tuples of the intermediate urls and status codes.

head(path, data={}, follow=False, **extra)

Makes a HEAD request on the provided path and returns a Response object. This method works just like Client.get(), including the follow and extra arguments, except it does not return a message body.

options(path, data='', content_type='application/octet-stream', follow=False, **extra)

Makes an OPTIONS request on the provided path and returns a Response object. Useful for testing RESTful interfaces.

When data is provided, it is used as the request body, and a Content-Type header is set to content_type.

Changed in version 1.5: Client.options() used to process data like Client.get().

The follow and extra arguments act the same as for Client.get().

put(path, data='', content_type='application/octet-stream', follow=False, **extra)

Makes a PUT request on the provided path and returns a Response object. Useful for testing RESTful interfaces.

When data is provided, it is used as the request body, and a Content-Type header is set to content_type.

Changed in version 1.5: Client.put() used to process data like Client.post().

The follow and extra arguments act the same as for Client.get().

patch(path, data='', content_type='application/octet-stream', follow=False, **extra)

Makes a PATCH request on the provided path and returns a Response object. Useful for testing RESTful interfaces.

The follow and extra arguments act the same as for Client.get().

delete(path, data='', content_type='application/octet-stream', follow=False, **extra)

Makes an DELETE request on the provided path and returns a Response object. Useful for testing RESTful interfaces.

When data is provided, it is used as the request body, and a Content-Type header is set to content_type.

Changed in version 1.5: Client.delete() used to process data like Client.get().

The follow and extra arguments act the same as for Client.get().

login(**credentials)

If your site uses Django’s authentication system and you deal with logging in users, you can use the test client’s login() method to simulate the effect of a user logging into the site.

After you call this method, the test client will have all the cookies and session data required to pass any login-based tests that may form part of a view.

The format of the credentials argument depends on which authentication backend you’re using (which is configured by your :setting:`AUTHENTICATION_BACKENDS` setting). If you’re using the standard authentication backend provided by Django (ModelBackend), credentials should be the user’s username and password, provided as keyword arguments:

>>> c = Client()
>>> c.login(username='fred', password='secret')

# Now you can access a view that's only available to logged-in users.

If you’re using a different authentication backend, this method may require different credentials. It requires whichever credentials are required by your backend’s authenticate() method.

login() returns True if it the credentials were accepted and login was successful.

Finally, you’ll need to remember to create user accounts before you can use this method. As we explained above, the test runner is executed using a test database, which contains no users by default. As a result, user accounts that are valid on your production site will not work under test conditions. You’ll need to create users as part of the test suite – either manually (using the Django model API) or with a test fixture. Remember that if you want your test user to have a password, you can’t set the user’s password by setting the password attribute directly – you must use the set_password() function to store a correctly hashed password. Alternatively, you can use the create_user() helper method to create a new user with a correctly hashed password.

logout()

If your site uses Django’s authentication system, the logout() method can be used to simulate the effect of a user logging out of your site.

After you call this method, the test client will have all the cookies and session data cleared to defaults. Subsequent requests will appear to come from an AnonymousUser.

Testing responses

The get() and post() methods both return a Response object. This Response object is not the same as the HttpResponse object returned Django views; the test response object has some additional data useful for test code to verify.

Specifically, a Response object has the following attributes:

class django.test.client.Response

client

The test client that was used to make the request that resulted in the response.

content

The body of the response, as a string. This is the final page content as rendered by the view, or any error message.

context

The template Context instance that was used to render the template that produced the response content.

If the rendered page used multiple templates, then context will be a list of Context objects, in the order in which they were rendered.

Regardless of the number of templates used during rendering, you can retrieve context values using the [] operator. For example, the context variable name could be retrieved using:

>>> response = client.get('/foo/')
>>> response.context['name']
'Arthur'

request

The request data that stimulated the response.

status_code

The HTTP status of the response, as an integer. See RFC 2616#section-10 for a full list of HTTP status codes.

templates

A list of Template instances used to render the final content, in the order they were rendered. For each template in the list, use template.name to get the template’s file name, if the template was loaded from a file. (The name is a string such as 'admin/index.html'.)

You can also use dictionary syntax on the response object to query the value of any settings in the HTTP headers. For example, you could determine the content type of a response using response['Content-Type'].

Exceptions

If you point the test client at a view that raises an exception, that exception will be visible in the test case. You can then use a standard try ... except block or assertRaises() to test for exceptions.

The only exceptions that are not visible to the test client are Http404, PermissionDenied and SystemExit. Django catches these exceptions internally and converts them into the appropriate HTTP response codes. In these cases, you can check response.status_code in your test.

Persistent state

The test client is stateful. If a response returns a cookie, then that cookie will be stored in the test client and sent with all subsequent get() and post() requests.

Expiration policies for these cookies are not followed. If you want a cookie to expire, either delete it manually or create a new Client instance (which will effectively delete all cookies).

A test client has two attributes that store persistent state information. You can access these properties as part of a test condition.

Client.cookies

A Python SimpleCookie object, containing the current values of all the client cookies. See the documentation of the Cookie module for more.

Client.session

A dictionary-like object containing session information. See the session documentation for full details.

To modify the session and then save it, it must be stored in a variable first (because a new SessionStore is created every time this property is accessed):

def test_something(self):
    session = self.client.session
    session['somekey'] = 'test'
    session.save()

Example

The following is a simple unit test using the test client:

from django.utils import unittest
from django.test.client import Client

class SimpleTest(unittest.TestCase):
    def setUp(self):
        # Every test needs a client.
        self.client = Client()

    def test_details(self):
        # Issue a GET request.
        response = self.client.get('/customer/details/')

        # Check that the response is 200 OK.
        self.assertEqual(response.status_code, 200)

        # Check that the rendered context contains 5 customers.
        self.assertEqual(len(response.context['customers']), 5)

See also

django.test.client.RequestFactory

Provided test case classes

Normal Python unit test classes extend a base class of unittest.TestCase. Django provides a few extensions of this base class:

Hierarchy of Django unit testing classes

Regardless of the version of Python you’re using, if you’ve installed unittest2, django.utils.unittest will point to that library.

SimpleTestCase

class django.test.SimpleTestCase

A thin subclass of unittest.TestCase, it extends it with some basic functionality like:

• Saving and restoring the Python warning machinery state.
• Some useful assertions like:
  • Checking that a callable raises a certain exception.
  • Testing form field rendering and error treatment.
  • Testing HTML responses for the presence/lack of a given fragment.
  • Verifying that a template has/hasn't been used to generate a given response content.
  • Verifying a HTTP redirect is performed by the app.
  • Robustly testing two HTML fragments for equality/inequality or containment.
  • Robustly testing two XML fragments for equality/inequality.
  • Robustly testing two JSON fragments for equality.
• The ability to run tests with modified settings.
• Using the client Client.
• Custom test-time URL maps.

Changed in version 1.6: The latter two features were moved from TransactionTestCase to SimpleTestCase in Django 1.6.

If you need any of the other more complex and heavyweight Django-specific features like:

• Testing or using the ORM.
• Database fixtures.
• Test skipping based on database backend features.
• The remaining specialized assert* methods.

then you should use TransactionTestCase or TestCase instead.

SimpleTestCase inherits from django.utils.unittest.TestCase.

TransactionTestCase

class django.test.TransactionTestCase

Django’s TestCase class (described below) makes use of database transaction facilities to speed up the process of resetting the database to a known state at the beginning of each test. A consequence of this, however, is that the effects of transaction commit and rollback cannot be tested by a Django TestCase class. If your test requires testing of such transactional behavior, you should use a Django TransactionTestCase.

TransactionTestCase and TestCase are identical except for the manner in which the database is reset to a known state and the ability for test code to test the effects of commit and rollback:

• A TransactionTestCase resets the database after the test runs by truncating all tables. A TransactionTestCase may call commit and rollback and observe the effects of these calls on the database.

• A TestCase, on the other hand, does not truncate tables after a test. Instead, it encloses the test code in a database transaction that is rolled back at the end of the test. Both explicit commits like transaction.commit() and implicit ones that may be caused by transaction.atomic() are replaced with a nop operation. This guarantees that the rollback at the end of the test restores the database to its initial state.

  When running on a database that does not support rollback (e.g. MySQL with the MyISAM storage engine), TestCase falls back to initializing the database by truncating tables and reloading initial data.

Warning

While commit and rollback operations still appear to work when used in TestCase, no actual commit or rollback will be performed by the database. This can cause your tests to pass or fail unexpectedly. Always use TransactionTestCase when testing transactional behavior.

Changed in version 1.5: Prior to 1.5, TransactionTestCase flushed the database tables before each test. In Django 1.5, this is instead done after the test has been run.

When the flush took place before the test, it was guaranteed that primary key values started at one in TransactionTestCase tests.

Tests should not depend on this behavior, but for legacy tests that do, the reset_sequences attribute can be used until the test has been properly updated.

Changed in version 1.5: The order in which tests are run has changed. See Order in which tests are executed.

TransactionTestCase inherits from SimpleTestCase.

TestCase

class django.test.TestCase

This class provides some additional capabilities that can be useful for testing Web sites.

Converting a normal unittest.TestCase to a Django TestCase is easy: Just change the base class of your test from 'unittest.TestCase' to 'django.test.TestCase'. All of the standard Python unit test functionality will continue to be available, but it will be augmented with some useful additions, including:

• Automatic loading of fixtures.
• Wraps each test in a transaction.
• Creates a TestClient instance.
• Django-specific assertions for testing for things like redirection and form errors.

Changed in version 1.5: The order in which tests are run has changed. See Order in which tests are executed.

TestCase inherits from TransactionTestCase.

LiveServerTestCase

class django.test.LiveServerTestCase

LiveServerTestCase does basically the same as TransactionTestCase with one extra feature: it launches a live Django server in the background on setup, and shuts it down on teardown. This allows the use of automated test clients other than the Django dummy client such as, for example, the Selenium client, to execute a series of functional tests inside a browser and simulate a real user’s actions.

By default the live server’s address is 'localhost:8081' and the full URL can be accessed during the tests with self.live_server_url. If you’d like to change the default address (in the case, for example, where the 8081 port is already taken) then you may pass a different one to the :djadmin:`test` command via the :djadminopt:`–liveserver` option, for example:

./manage.py test --liveserver=localhost:8082

Another way of changing the default server address is by setting the DJANGO_LIVE_TEST_SERVER_ADDRESS environment variable somewhere in your code (for example, in a custom test runner):

import os
os.environ['DJANGO_LIVE_TEST_SERVER_ADDRESS'] = 'localhost:8082'

In the case where the tests are run by multiple processes in parallel (for example, in the context of several simultaneous continuous integration builds), the processes will compete for the same address, and therefore your tests might randomly fail with an “Address already in use” error. To avoid this problem, you can pass a comma-separated list of ports or ranges of ports (at least as many as the number of potential parallel processes). For example:

./manage.py test --liveserver=localhost:8082,8090-8100,9000-9200,7041

Then, during test execution, each new live test server will try every specified port until it finds one that is free and takes it.

To demonstrate how to use LiveServerTestCase, let’s write a simple Selenium test. First of all, you need to install the selenium package into your Python path:

pip install selenium

Then, add a LiveServerTestCase-based test to your app’s tests module (for example: myapp/tests.py). The code for this test may look as follows:

from django.test import LiveServerTestCase
from selenium.webdriver.firefox.webdriver import WebDriver

class MySeleniumTests(LiveServerTestCase):
    fixtures = ['user-data.json']

    @classmethod
    def setUpClass(cls):
        cls.selenium = WebDriver()
        super(MySeleniumTests, cls).setUpClass()

    @classmethod
    def tearDownClass(cls):
        cls.selenium.quit()
        super(MySeleniumTests, cls).tearDownClass()

    def test_login(self):
        self.selenium.get('%s%s' % (self.live_server_url, '/login/'))
        username_input = self.selenium.find_element_by_name("username")
        username_input.send_keys('myuser')
        password_input = self.selenium.find_element_by_name("password")
        password_input.send_keys('secret')
        self.selenium.find_element_by_xpath('//input[@value="Log in"]').click()

Finally, you may run the test as follows:

./manage.py test myapp.MySeleniumTests.test_login

This example will automatically open Firefox then go to the login page, enter the credentials and press the “Log in” button. Selenium offers other drivers in case you do not have Firefox installed or wish to use another browser. The example above is just a tiny fraction of what the Selenium client can do; check out the full reference for more details.

Note

LiveServerTestCase makes use of the staticfiles contrib app so you’ll need to have your project configured accordingly (in particular by setting :setting:`STATIC_URL`).

Note

When using an in-memory SQLite database to run the tests, the same database connection will be shared by two threads in parallel: the thread in which the live server is run and the thread in which the test case is run. It’s important to prevent simultaneous database queries via this shared connection by the two threads, as that may sometimes randomly cause the tests to fail. So you need to ensure that the two threads don’t access the database at the same time. In particular, this means that in some cases (for example, just after clicking a link or submitting a form), you might need to check that a response is received by Selenium and that the next page is loaded before proceeding with further test execution. Do this, for example, by making Selenium wait until the <body> HTML tag is found in the response (requires Selenium > 2.13):

def test_login(self):
    from selenium.webdriver.support.wait import WebDriverWait
    timeout = 2
    ...
    self.selenium.find_element_by_xpath('//input[@value="Log in"]').click()
    # Wait until the response is received
    WebDriverWait(self.selenium, timeout).until(
        lambda driver: driver.find_element_by_tag_name('body'))

The tricky thing here is that there’s really no such thing as a “page load,” especially in modern Web apps that generate HTML dynamically after the server generates the initial document. So, simply checking for the presence of <body> in the response might not necessarily be appropriate for all use cases. Please refer to the Selenium FAQ and Selenium documentation for more information.

Test cases features

Default test client

SimpleTestCase.client

Every test case in a django.test.*TestCase instance has access to an instance of a Django test client. This client can be accessed as self.client. This client is recreated for each test, so you don’t have to worry about state (such as cookies) carrying over from one test to another.

This means, instead of instantiating a Client in each test:

from django.utils import unittest
from django.test.client import Client

class SimpleTest(unittest.TestCase):
    def test_details(self):
        client = Client()
        response = client.get('/customer/details/')
        self.assertEqual(response.status_code, 200)

    def test_index(self):
        client = Client()
        response = client.get('/customer/index/')
        self.assertEqual(response.status_code, 200)

...you can just refer to self.client, like so:

from django.test import TestCase

class SimpleTest(TestCase):
    def test_details(self):
        response = self.client.get('/customer/details/')
        self.assertEqual(response.status_code, 200)

    def test_index(self):
        response = self.client.get('/customer/index/')
        self.assertEqual(response.status_code, 200)

Customizing the test client

SimpleTestCase.client_class

If you want to use a different Client class (for example, a subclass with customized behavior), use the client_class class attribute:

from django.test import TestCase
from django.test.client import Client

class MyTestClient(Client):
    # Specialized methods for your environment...

class MyTest(TestCase):
    client_class = MyTestClient

    def test_my_stuff(self):
        # Here self.client is an instance of MyTestClient...
        call_some_test_code()

Fixture loading

TransactionTestCase.fixtures

A test case for a database-backed Web site isn’t much use if there isn’t any data in the database. To make it easy to put test data into the database, Django’s custom TransactionTestCase class provides a way of loading fixtures.

A fixture is a collection of data that Django knows how to import into a database. For example, if your site has user accounts, you might set up a fixture of fake user accounts in order to populate your database during tests.

The most straightforward way of creating a fixture is to use the :djadmin:`manage.py dumpdata <dumpdata>` command. This assumes you already have some data in your database. See the :djadmin:`dumpdata documentation<dumpdata>` for more details.

Note

If you’ve ever run :djadmin:`manage.py syncdb<syncdb>`, you’ve already used a fixture without even knowing it! When you call :djadmin:`syncdb` in the database for the first time, Django installs a fixture called initial_data. This gives you a way of populating a new database with any initial data, such as a default set of categories.

Fixtures with other names can always be installed manually using the :djadmin:`manage.py loaddata<loaddata>` command.

Initial SQL data and testing

Django provides a second way to insert initial data into models – the custom SQL hook. However, this technique cannot be used to provide initial data for testing purposes. Django’s test framework flushes the contents of the test database after each test; as a result, any data added using the custom SQL hook will be lost.

Once you’ve created a fixture and placed it in a fixtures directory in one of your :setting:`INSTALLED_APPS`, you can use it in your unit tests by specifying a fixtures class attribute on your django.test.TestCase subclass:

from django.test import TestCase
from myapp.models import Animal

class AnimalTestCase(TestCase):
    fixtures = ['mammals.json', 'birds']

    def setUp(self):
        # Test definitions as before.
        call_setup_methods()

    def testFluffyAnimals(self):
        # A test that uses the fixtures.
        call_some_test_code()

Here’s specifically what will happen:

• At the start of each test case, before setUp() is run, Django will flush the database, returning the database to the state it was in directly after :djadmin:`syncdb` was called.
• Then, all the named fixtures are installed. In this example, Django will install any JSON fixture named mammals, followed by any fixture named birds. See the :djadmin:`loaddata` documentation for more details on defining and installing fixtures.

This flush/load procedure is repeated for each test in the test case, so you can be certain that the outcome of a test will not be affected by another test, or by the order of test execution.

By default, fixtures are only loaded into the default database. If you are using multiple databases and set multi_db=True, fixtures will be loaded into all databases.

URLconf configuration

SimpleTestCase.urls

If your application provides views, you may want to include tests that use the test client to exercise those views. However, an end user is free to deploy the views in your application at any URL of their choosing. This means that your tests can’t rely upon the fact that your views will be available at a particular URL.

In order to provide a reliable URL space for your test, django.test.*TestCase classes provide the ability to customize the URLconf configuration for the duration of the execution of a test suite. If your *TestCase instance defines an urls attribute, the *TestCase will use the value of that attribute as the :setting:`ROOT_URLCONF` for the duration of that test.

For example:

from django.test import TestCase

class TestMyViews(TestCase):
    urls = 'myapp.test_urls'

    def testIndexPageView(self):
        # Here you'd test your view using ``Client``.
        call_some_test_code()

This test case will use the contents of myapp.test_urls as the URLconf for the duration of the test case.

Multi-database support

TransactionTestCase.multi_db

Django sets up a test database corresponding to every database that is defined in the :setting:`DATABASES` definition in your settings file. However, a big part of the time taken to run a Django TestCase is consumed by the call to flush that ensures that you have a clean database at the start of each test run. If you have multiple databases, multiple flushes are required (one for each database), which can be a time consuming activity – especially if your tests don’t need to test multi-database activity.

As an optimization, Django only flushes the default database at the start of each test run. If your setup contains multiple databases, and you have a test that requires every database to be clean, you can use the multi_db attribute on the test suite to request a full flush.

For example:

class TestMyViews(TestCase):
    multi_db = True

    def testIndexPageView(self):
        call_some_test_code()

This test case will flush all the test databases before running testIndexPageView.

The multi_db flag also affects into which databases the attr:TransactionTestCase.fixtures are loaded. By default (when multi_db=False), fixtures are only loaded into the default database. If multi_db=True, fixtures are loaded into all databases.

Overriding settings

SimpleTestCase.settings()

For testing purposes it’s often useful to change a setting temporarily and revert to the original value after running the testing code. For this use case Django provides a standard Python context manager (see PEP 343) settings(), which can be used like this:

from django.test import TestCase

class LoginTestCase(TestCase):

    def test_login(self):

        # First check for the default behavior
        response = self.client.get('/sekrit/')
        self.assertRedirects(response, '/accounts/login/?next=/sekrit/')

        # Then override the LOGIN_URL setting
        with self.settings(LOGIN_URL='/other/login/'):
            response = self.client.get('/sekrit/')
            self.assertRedirects(response, '/other/login/?next=/sekrit/')

This example will override the :setting:`LOGIN_URL` setting for the code in the with block and reset its value to the previous state afterwards.

django.test.utils.override_settings()

In case you want to override a setting for just one test method or even the whole TestCase class, Django provides the override_settings() decorator (see PEP 318). It’s used like this:

from django.test import TestCase
from django.test.utils import override_settings

class LoginTestCase(TestCase):

    @override_settings(LOGIN_URL='/other/login/')
    def test_login(self):
        response = self.client.get('/sekrit/')
        self.assertRedirects(response, '/other/login/?next=/sekrit/')

The decorator can also be applied to test case classes:

from django.test import TestCase
from django.test.utils import override_settings

@override_settings(LOGIN_URL='/other/login/')
class LoginTestCase(TestCase):

    def test_login(self):
        response = self.client.get('/sekrit/')
        self.assertRedirects(response, '/other/login/?next=/sekrit/')

Note

When given a class, the decorator modifies the class directly and returns it; it doesn’t create and return a modified copy of it. So if you try to tweak the above example to assign the return value to a different name than LoginTestCase, you may be surprised to find that the original LoginTestCase is still equally affected by the decorator.

You can also simulate the absence of a setting by deleting it after settings have been overriden, like this:

@override_settings()
def test_something(self):
    del settings.LOGIN_URL
    ...

When overriding settings, make sure to handle the cases in which your app’s code uses a cache or similar feature that retains state even if the setting is changed. Django provides the django.test.signals.setting_changed signal that lets you register callbacks to clean up and otherwise reset state when settings are changed.

Django itself uses this signal to reset various data:

Overriden settings	Data reset
USE_TZ, TIME_ZONE	Databases timezone
TEMPLATE_CONTEXT_PROCESSORS	Context processors cache
TEMPLATE_LOADERS	Template loaders cache
SERIALIZATION_MODULES	Serializers cache
LOCALE_PATHS, LANGUAGE_CODE	Default translation and loaded translations
MEDIA_ROOT, DEFAULT_FILE_STORAGE	Default file storage

Emptying the test outbox

If you use any of Django’s custom TestCase classes, the test runner will clear the contents of the test email outbox at the start of each test case.

For more detail on email services during tests, see Email services below.

Assertions

As Python’s normal unittest.TestCase class implements assertion methods such as assertTrue() and assertEqual(), Django’s custom TestCase class provides a number of custom assertion methods that are useful for testing Web applications:

The failure messages given by most of these assertion methods can be customized with the msg_prefix argument. This string will be prefixed to any failure message generated by the assertion. This allows you to provide additional details that may help you to identify the location and cause of an failure in your test suite.

SimpleTestCase.assertRaisesMessage(expected_exception, expected_message, callable_obj=None, *args, **kwargs)

Asserts that execution of callable callable_obj raised the expected_exception exception and that such exception has an expected_message representation. Any other outcome is reported as a failure. Similar to unittest’s assertRaisesRegexp() with the difference that expected_message isn’t a regular expression.

SimpleTestCase.assertFieldOutput(self, fieldclass, valid, invalid, field_args=None, field_kwargs=None, empty_value=u'')

Asserts that a form field behaves correctly with various inputs.

Parameters:

• fieldclass – the class of the field to be tested.
• valid – a dictionary mapping valid inputs to their expected cleaned values.
• invalid – a dictionary mapping invalid inputs to one or more raised error messages.
• field_args – the args passed to instantiate the field.
• field_kwargs – the kwargs passed to instantiate the field.
• empty_value – the expected clean output for inputs in empty_values.

For example, the following code tests that an EmailField accepts “a@a.com” as a valid email address, but rejects “aaa” with a reasonable error message:

self.assertFieldOutput(EmailField, {'a@a.com': 'a@a.com'}, {'aaa': [u'Enter a valid email address.']})

SimpleTestCase.assertFormError(response, form, field, errors, msg_prefix='')

Asserts that a field on a form raises the provided list of errors when rendered on the form.

form is the name the Form instance was given in the template context.

field is the name of the field on the form to check. If field has a value of None, non-field errors (errors you can access via form.non_field_errors()) will be checked.

errors is an error string, or a list of error strings, that are expected as a result of form validation.

SimpleTestCase.assertFormsetError(response, formset, form_index, field, errors, msg_prefix='')

New in version 1.6.

Asserts that the formset raises the provided list of errors when rendered.

formset is the name the Formset instance was given in the template context.

form_index is the number of the form within the Formset. If form_index has a value of None, non-form errors (errors you can access via formset.non_form_errors()) will be checked.

field is the name of the field on the form to check. If field has a value of None, non-field errors (errors you can access via form.non_field_errors()) will be checked.

errors is an error string, or a list of error strings, that are expected as a result of form validation.

SimpleTestCase.assertContains(response, text, count=None, status_code=200, msg_prefix='', html=False)

Asserts that a Response instance produced the given status_code and that text appears in the content of the response. If count is provided, text must occur exactly count times in the response.

Set html to True to handle text as HTML. The comparison with the response content will be based on HTML semantics instead of character-by-character equality. Whitespace is ignored in most cases, attribute ordering is not significant. See assertHTMLEqual() for more details.

SimpleTestCase.assertNotContains(response, text, status_code=200, msg_prefix='', html=False)

Asserts that a Response instance produced the given status_code and that text does not appears in the content of the response.

Set html to True to handle text as HTML. The comparison with the response content will be based on HTML semantics instead of character-by-character equality. Whitespace is ignored in most cases, attribute ordering is not significant. See assertHTMLEqual() for more details.

SimpleTestCase.assertTemplateUsed(response, template_name, msg_prefix='')

Asserts that the template with the given name was used in rendering the response.

The name is a string such as 'admin/index.html'.

You can use this as a context manager, like this:

with self.assertTemplateUsed('index.html'):
    render_to_string('index.html')
with self.assertTemplateUsed(template_name='index.html'):
    render_to_string('index.html')

SimpleTestCase.assertTemplateNotUsed(response, template_name, msg_prefix='')

Asserts that the template with the given name was not used in rendering the response.

You can use this as a context manager in the same way as assertTemplateUsed().

SimpleTestCase.assertRedirects(response, expected_url, status_code=302, target_status_code=200, msg_prefix='')

Asserts that the response return a status_code redirect status, it redirected to expected_url (including any GET data), and the final page was received with target_status_code.

If your request used the follow argument, the expected_url and target_status_code will be the url and status code for the final point of the redirect chain.

SimpleTestCase.assertHTMLEqual(html1, html2, msg=None)

Asserts that the strings html1 and html2 are equal. The comparison is based on HTML semantics. The comparison takes following things into account:

• Whitespace before and after HTML tags is ignored.
• All types of whitespace are considered equivalent.
• All open tags are closed implicitly, e.g. when a surrounding tag is closed or the HTML document ends.
• Empty tags are equivalent to their self-closing version.
• The ordering of attributes of an HTML element is not significant.
• Attributes without an argument are equal to attributes that equal in name and value (see the examples).

The following examples are valid tests and don’t raise any AssertionError:

self.assertHTMLEqual('<p>Hello <b>world!</p>',
    '''<p>
        Hello   <b>world! <b/>
    </p>''')
self.assertHTMLEqual(
    '<input type="checkbox" checked="checked" id="id_accept_terms" />',
    '<input id="id_accept_terms" type='checkbox' checked>')

html1 and html2 must be valid HTML. An AssertionError will be raised if one of them cannot be parsed.

Output in case of error can be customized with the msg argument.

SimpleTestCase.assertHTMLNotEqual(html1, html2, msg=None)

Asserts that the strings html1 and html2 are not equal. The comparison is based on HTML semantics. See assertHTMLEqual() for details.

html1 and html2 must be valid HTML. An AssertionError will be raised if one of them cannot be parsed.

Output in case of error can be customized with the msg argument.

SimpleTestCase.assertXMLEqual(xml1, xml2, msg=None)

New in version 1.5.

Asserts that the strings xml1 and xml2 are equal. The comparison is based on XML semantics. Similarily to assertHTMLEqual(), the comparison is made on parsed content, hence only semantic differences are considered, not syntax differences. When unvalid XML is passed in any parameter, an AssertionError is always raised, even if both string are identical.

Output in case of error can be customized with the msg argument.

SimpleTestCase.assertXMLNotEqual(xml1, xml2, msg=None)

New in version 1.5.

Asserts that the strings xml1 and xml2 are not equal. The comparison is based on XML semantics. See assertXMLEqual() for details.

Output in case of error can be customized with the msg argument.

SimpleTestCase.assertInHTML(needle, haystack, count=None, msg_prefix='')

New in version 1.5.

Asserts that the HTML fragment needle is contained in the haystack one.

If the count integer argument is specified, then additionally the number of needle occurrences will be strictly verified.

Whitespace in most cases is ignored, and attribute ordering is not significant. The passed-in arguments must be valid HTML.

SimpleTestCase.assertJSONEqual(raw, expected_data, msg=None)

New in version 1.5.

Asserts that the JSON fragments raw and expected_data are equal. Usual JSON non-significant whitespace rules apply as the heavyweight is delegated to the json library.

Output in case of error can be customized with the msg argument.

TransactionTestCase.assertQuerysetEqual(qs, values, transform=repr, ordered=True)

Asserts that a queryset qs returns a particular list of values values.

The comparison of the contents of qs and values is performed using the function transform; by default, this means that the repr() of each value is compared. Any other callable can be used if repr() doesn’t provide a unique or helpful comparison.

By default, the comparison is also ordering dependent. If qs doesn’t provide an implicit ordering, you can set the ordered parameter to False, which turns the comparison into a Python set comparison.

Changed in version 1.6: The method now checks for undefined order and raises ValueError if undefined order is spotted. The ordering is seen as undefined if the given qs isn’t ordered and the comparison is against more than one ordered values.

TransactionTestCase.assertNumQueries(num, func, *args, **kwargs)

Asserts that when func is called with *args and **kwargs that num database queries are executed.

If a "using" key is present in kwargs it is used as the database alias for which to check the number of queries. If you wish to call a function with a using parameter you can do it by wrapping the call with a lambda to add an extra parameter:

self.assertNumQueries(7, lambda: my_function(using=7))

You can also use this as a context manager:

with self.assertNumQueries(2):
    Person.objects.create(name="Aaron")
    Person.objects.create(name="Daniel")

Email services

If any of your Django views send email using Django’s email functionality, you probably don’t want to send email each time you run a test using that view. For this reason, Django’s test runner automatically redirects all Django-sent email to a dummy outbox. This lets you test every aspect of sending email – from the number of messages sent to the contents of each message – without actually sending the messages.

The test runner accomplishes this by transparently replacing the normal email backend with a testing backend. (Don’t worry – this has no effect on any other email senders outside of Django, such as your machine’s mail server, if you’re running one.)

django.core.mail.outbox

During test running, each outgoing email is saved in django.core.mail.outbox. This is a simple list of all EmailMessage instances that have been sent. The outbox attribute is a special attribute that is created only when the locmem email backend is used. It doesn’t normally exist as part of the django.core.mail module and you can’t import it directly. The code below shows how to access this attribute correctly.

Here’s an example test that examines django.core.mail.outbox for length and contents:

from django.core import mail
from django.test import TestCase

class EmailTest(TestCase):
    def test_send_email(self):
        # Send message.
        mail.send_mail('Subject here', 'Here is the message.',
            'from@example.com', ['to@example.com'],
            fail_silently=False)

        # Test that one message has been sent.
        self.assertEqual(len(mail.outbox), 1)

        # Verify that the subject of the first message is correct.
        self.assertEqual(mail.outbox[0].subject, 'Subject here')

As noted previously, the test outbox is emptied at the start of every test in a Django *TestCase. To empty the outbox manually, assign the empty list to mail.outbox:

from django.core import mail

# Empty the test outbox
mail.outbox = []

Skipping tests

The unittest library provides the @skipIf and @skipUnless decorators to allow you to skip tests if you know ahead of time that those tests are going to fail under certain conditions.

For example, if your test requires a particular optional library in order to succeed, you could decorate the test case with @skipIf. Then, the test runner will report that the test wasn’t executed and why, instead of failing the test or omitting the test altogether.

To supplement these test skipping behaviors, Django provides two additional skip decorators. Instead of testing a generic boolean, these decorators check the capabilities of the database, and skip the test if the database doesn’t support a specific named feature.

The decorators use a string identifier to describe database features. This string corresponds to attributes of the database connection features class. See django.db.backends.BaseDatabaseFeatures class for a full list of database features that can be used as a basis for skipping tests.

django.test.skipIfDBFeature(feature_name_string)

Skip the decorated test if the named database feature is supported.

For example, the following test will not be executed if the database supports transactions (e.g., it would not run under PostgreSQL, but it would under MySQL with MyISAM tables):

class MyTests(TestCase):
    @skipIfDBFeature('supports_transactions')
    def test_transaction_behavior(self):
        # ... conditional test code

django.test.skipUnlessDBFeature(feature_name_string)

Skip the decorated test if the named database feature is not supported.

For example, the following test will only be executed if the database supports transactions (e.g., it would run under PostgreSQL, but not under MySQL with MyISAM tables):

class MyTests(TestCase):
    @skipUnlessDBFeature('supports_transactions')
    def test_transaction_behavior(self):
        # ... conditional test code